Imagine your car’s battery is dead in the middle of journey and you don’t know how to use battery jumper cables. However, It is not that difficult a task but you could end up with more serious problems if you miss any important step. There is a proper way to jump your car’s dead battery. We will discuss it in detail.
COMMON SCENERIOS
There are many reasons for car’s battery getting dead like leaving lights and electricity ON for a long time, the Battery is very old, Faulty Alternators, Lack of Regular Car maintenance, and Short Drives that don’t allow the battery to fully charge. Apart from these, there can be other exceptional reasons but these are very common.
SAFETY CONCERNS
As we discussed earlier that jump-starting a car’s dead battery is not that difficult but still, we have to ensure some safety precautions. For Example, Battery leakage, Proper Cable Connection, Condition of Cable Wire, Car must be off while connecting cables to the battery to avoid Spark. These are some precautions you need to take while jumping a dead battery.
Tools and Equipment Needed
First of all, you need a better quality jumper cable which is in proper condition. It must not be broken from inside or outside for proper completion of the process. Carry rubber gloves to avoid any shock of 12 Volts while connecting leads to the battery’s negative and positive points.
You can buy jumper cables for battery from our website which do not have any quality issues. Moreover, It is 100% pure copper wire which will provide you with longer durability and better power transmission. Our Quality team ensures that you get what you have seen on our website as per the description.
Many times depending on the strange vehicle can damage your car’s battery and make your situation more difficult. Hence, it has been always recommended to start your car’s battery through a known car owner. You can also call emergency numbers to ask for help.
Additional Safety Precautions
Four Wheeler Battery have hazardous substances inside that’s why it is very important to carefully go through the process. Moreover, you can get electric shock while connecting leads for transferring power from one battery to another. Hence, it is always recommended to read the precautions written in the car user manual. Every car has different engine specifications and the manual will help you to figure out how to connect cables in the right way.
Step-by-Step Guide
1. Position the Vehicles
The first step is to make sure that both vehicles are standing close enough to ease the proper transmission of power from one charged battery to a dead battery. Hence, position both the vehicles next to each other Just like Shown in the Image.
2. Connect the Jumper Cables
Next, We have to connect jumper cables to the battery leads. There are two connection points on upper side i.e. positive and negative. Connect one connector to the positive lead and one connector to the negative lead. After that, Connect another cable to the positive and negative leads of another battery respectively. Make sure that both negative and positive leads are connected through jumper cable connectors respectively.
3. Start the Engine
Now our Next step is to start engine of the working car. Once you ensure that connectors are properly attached, just simply sit inside the working car or tell that volunteer to slowly turn On the ignition. Let it start for a few minutes and after that try to start the engine of the dead car. Once your dead car gets started, leave it for a few minutes with that engine started so that the battery will get charged from the ignition.
4. Disconnect the Cables
Make sure that each connector does not get touched while removing it from the battery. It can cause serious injury to your hand or damage your jumper cable due to a spark. Removing each lead one by one is always recommended.
Additional Tips
If engine does not start after this process, then ensure below mentioned points :-
- Check the connections as sometimes connectors are not connected properly.
- Allow more charging time, leave engine start for 5 to 10 minutes.
- Try connecting negative point to one metal part which will improve grounding.
Let the Car Run
As we discussed earlier that leave your car’s engine ON for few minutes after it gets enough power from another car’s battery. Your car will become fully charged in Approx 30 minutes.
How to Maintain Your Car's Battery
- Try to avoid short trips as they do not let your car’s battery charge fully. However, you can also let your car engine start for few more minutes during your short journey.
- Corrosion damages your car battery that’s why it is recommended to clean your car belongings regularly.
- Try to park in a shaded area as extreme high and low temperature damages car batteries.
- Other tips are cleaning terminals, ensuring proper charging, ensuring the battery is properly secure to prevent vibration, etc.
Other Tips
You might have seen that cars which run regularly have more battery life as compared to those that just stand outside the house for longer period. Exercise keeps your body and heart healthy just like that way your car also stays healthy when you drive it at least twice a week.
When to Replace Your Car's Battery
- If your car is taking longer time to start then you need to replace your Vehicle battery.
- Many cars have options or indicators in car that start showing signs for car battery replacement.
- Moreover, if battery is older than 3 to 5 years then the time has come to replace it.
- If you are frequently Jumping your car’s battery then replacing the battery is a good option.
Conclusion
Summary of how to safely use battery jumper cables.
- Park the donor vehicle close enough
- Identify negative and positive leads on the battery.
- Connect red to positive points and Black to negative points of both batteries.
- Connect the final black cable to one metal point.
- Star donor car for 5 to 10 minutes and once it gets started then leave for 15 to 20 minutes.
Importance
Mostly people do not understand the importance of jumper cables for battery but they very important because emergency does not provides warning before occurring. Hence, it is one of must have car accessory for emergency need.
If still problem persist, then it is always recommended to seek for professional help. There are so many service companies that provides emergency vehicle help. You can google it and get number from website.